|
Title: |
|
Authors:
|
|
Abstract: This
study presents the application of Work Study techniques specifically Method
Study and Time Study techniques to diagnose and improve operational
inefficiencies in the filling and packaging line at Naqaa Al-Enaya Perfumes and
Cosmetics Factory, a Saudi-based SFDA-licensed manufacturing facility.
Preliminary investigation revealed an unexplained production slowdown in the
manual filling operation, which handles small batches of fewer than 2,000
units. The Method Study procedure was systematically applied through four
stages: selection, recording, critical examination and development of an
improved method. The recording phase identified key inefficiencies, including a
2.7-meter transport distance per cycle, excessive static loading on the left
hand (60% of cycle time in a holding state), workload imbalance among three
operators, and non-value-added activities such as product refilling and wiping.
The proposed method introduced a triangular bottle-holding base, a manual
sticker-pressing tool, a repositioned weighing scale, a mobile trolley,
heat-resistant gloves, and a reconfigured workstation layout. Work Measurement,
conducted through a stopwatch time study across ten cycles with a 9% allowance
factor, quantified the improvements. Results demonstrated a reduction in
process steps from 11 to 9, a decrease in transport distance from 2.7 to 2.0
meters (26% improvement), and a reduction in standard cycle time from 130.04 to
97.58 seconds per bottle with 25% time saving. Total implementation cost
remained minimal, requiring only low-cost ergonomic tools and workstation
reorganization. The findings confirm that systematic application of Work Study
techniques can yield substantial productivity gains in small-batch manual
operations without significant capital investment, and the proposed method is
recommended for formal adoption at the factory. DOI: http://dx.doi.org/10.51505/ijaemr.2026.11603 |
|
PDF Download |